No products were found matching your selection.
Other Related Products
-
- Size: 1270mm total width, about 1250mm working width, 1800m or 2000m length.
- Thickness: 130mic, 140mic and 150mic typical.
- Structure: crepe paper backing with rubber based pressure sensitive adhesive.
- Color: white, cream, light yellow or custom color.
- Paper core: 76mm core checked for roundness, straightness and shaft fit.
- Supply form: masking tape parent roll supply for slitting, rewinding and finished roll width planning.
-
- Backing: BOPP film
- Colors: Clear, brown, or white
- Adhesives: Hot melt, acrylic, or rubber
- Standard widths: 36-72 mm
- Formats: 50-100 m hand rolls / 500-1500 m machine rolls
- Use: Medium-heavy corrugated cartons
-
Packing tape for cold temperatures should be chosen by matching the adhesive, carton surface, application temperature, service temperature, sealing pressure, and storage time. This solution is for refrigerated warehouses, cold rooms, unheated winter packaging areas, and cartons that move from a warm sealing line into cold storage or winter transport. The main risks are edge lifting, poor initial tack, center seam opening, tape flagging, and weak contact on damp or recycled corrugated board. A safe selection process starts with surface inspection, actual carton testing, and 30 minute, 24 hour, and 72 hour checks before full use.
-
- Material: BOPP film backing
- Color: Brown / tan carton color
- Width: 48mm, 60mm, 72mm
- Roll length: 45m-1000m
- Roll type: Hand roll and machine roll
- Use: Carton packing and box closure
-
- Material: BOPP film backing with acrylic adhesive
- Color: Transparent, brown, tan or custom
- Thickness: Common 38um-65um
- Size: 36mm-76mm x 50m-1000m
- Roll Form: Finished roll, cut roll, log roll or jumbo roll
- Use: Carton sealing and packing line converting
-
- Color: translucent green
- Backing: PET / polyester film
- Adhesive: silicone pressure-sensitive adhesive
- Typical thickness: 0.06mm-0.08mm
- Short-term heat resistance: 200C-220C
- Formats: slit rolls and die-cut shapes
-
- Common colors: Red, yellow, green, blue, black, white, orange, and sample-matched shades
- Backing: Colored crepe paper with flexible hand-tear performance
- Adhesive: Pressure-sensitive rubber adhesive for short-term bonding
- Regular widths: 12 mm, 18 mm, 24 mm, 36 mm, 48 mm, 72 mm
- Roll lengths: 20 m, 30 m, 50 m, 55 m, or project-based length
- Format: Finished rolls converted from master rolls with carton/core color identification
-
- Material: LLDPE / PE stretch film
- Structure: vented holes with side airflow paths
- Thickness: 8-20 um typical range
- Width: 300-500 mm, common 400/450/500 mm
- Roll length: 500-1500 m by specification
- Use: manual wrapping for light-load pallets
-
- Material: clear BOPP film backing, also searched as clear OPP stationery tape.
- Adhesive: water-based acrylic adhesive, coating weight typically 13-22g/m2.
- Thickness: total thickness normally 38-52um, with film thickness around 23-28um.
- Sizes: 12mm, 15mm, 18mm, 24mm widths; 33m, 50m, 66m lengths.
- Core: 1 inch plastic core or paper core for desk dispenser compatible tape.
- Checks: slitting tolerance, core alignment, winding hardness, roll diameter, and sample converting.
